• mook@lemmy.ml
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    Interesting - I had imagined it being imploded into bits like the simulations on the news show.

    • philz@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      I believe this is the outer portion. The carbon fiber shell imploded and is probably not recoverable.

    • cyanarchy@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      I’m certainly no expert but I understand submarines have an inner and outer hull. The inner hull has to withstand the pressure of the deep but the outer hull does not. The inner hull would be crushed into bits but the outer hull and any equipment in-between would likely be ripped into large chunks as such a violent event occurs inside of it.

      • Nogami@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        12
        ·
        1 year ago

        Subs have dual hulls so they can fill the void between them with water to sink, or air to float, but they don’t dive anywhere near as deep. Most regular naval subs operate above 800 meters. They only have to be below the surface of the water for stealth, not at the bottom of the ocean.

        This craft was a single hull design as far as I’m aware, designed with a rigid hull to try and counteract the pressure at the bottom.

    • kiwifoxtrot@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      The outer shell didn’t hold pressure and was there to cover wires/ equipment exposed outside the pressure vessel.

    • dotancohen@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      2
      ·
      1 year ago

      like the simulations on the news show

      Why would you put any faith in a simulation by an organization that has no knowledge of the domain?