In my dmesg logs I get following errors a lot:

[232671.710741] BTRFS warning (device nvme0n1p2): csum failed root 257 ino 2496314 off 946159616 csum 0xb7eb9798 expected csum 0x3803f9f6 mirror 1
[232671.710746] BTRFS error (device nvme0n1p2): bdev /dev/nvme0n1p2 errs: wr 0, rd 0, flush 0, corrupt 19297, gen 0
[232673.984324] BTRFS warning (device nvme0n1p2): csum failed root 257 ino 2496314 off 946159616 csum 0xb7eb9798 expected csum 0x3803f9f6 mirror 1
[232673.984329] BTRFS error (device nvme0n1p2): bdev /dev/nvme0n1p2 errs: wr 0, rd 0, flush 0, corrupt 19298, gen 0
[232673.988851] BTRFS warning (device nvme0n1p2): csum failed root 257 ino 2496314 off 946159616 csum 0xb7eb9798 expected csum 0x3803f9f6 mirror 1

I’ve run btrfs scrub start -Bd /home as described here. The report afterwards claim everything is fine.

btrfs scrub status /home
UUID:             145c0d63-05f8-43a2-934b-7583cb5f6100
Scrub started:    Fri Aug  4 11:35:19 2023
Status:           finished
Duration:         0:07:49
Total to scrub:   480.21GiB
Rate:             1.02GiB/s
Error summary:    no errors found
    • Agility0971@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      yes I’m sure.

      root@archiso /mnt/arch # cat ./etc/fstab 
      # Static information about the filesystems.
      # See fstab(5) for details.
      
      #      
      # /dev/nvme0n1p2
      UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/         	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=256,subvol=/@	0 0
      
      # /dev/nvme0n1p2
      UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/.snapshots	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=260,subvol=/@.snapshots	0 0
      
      # /dev/nvme0n1p1
      UUID=4BF3-12AA      	/boot     	vfat      	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro	0 2
      
      # /dev/nvme0n1p2
      UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/home     	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=257,subvol=/@home	0 0
      
      # /dev/nvme0n1p2
      UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/var/cache/pacman/pkg	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=259,subvol=/@pkg	0 0
      
      # /dev/nvme0n1p2
      UUID=145c0d63-05f8-43a2-934b-7583cb5f6100	/var/log  	btrfs     	rw,relatime,ssd,discard=async,space_cache=v2,subvolid=258,subvol=/@log	0 0
      
    • Agility0971@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago
      root@archiso ~ # lsblk
      NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
      loop0         7:0    0   673M  1 loop /run/archiso/airootfs
      sda           8:0    0 476.9G  0 disk 
      └─sda1        8:1    0 476.9G  0 part 
      sdb           8:16   0 119.2G  0 disk 
      └─sdb1        8:17   0 119.2G  0 part 
      sdc           8:32   1  14.4G  0 disk 
      ├─sdc1        8:33   1   778M  0 part 
      └─sdc2        8:34   1    15M  0 part 
      nvme0n1     259:0    0 931.5G  0 disk 
      ├─nvme0n1p1 259:1    0   511M  0 part 
      └─nvme0n1p2 259:2    0   931G  0 part 
      root@archiso ~ # btrfs check /dev/nvme0n1p2
      Opening filesystem to check...
      Checking filesystem on /dev/nvme0n1p2
      UUID: 145c0d63-05f8-43a2-934b-7583cb5f6100
      [1/7] checking root items
      [2/7] checking extents
      [3/7] checking free space tree
      [4/7] checking fs roots
      [5/7] checking only csums items (without verifying data)
      [6/7] checking root refs
      [7/7] checking quota groups skipped (not enabled on this FS)
      found 514161029120 bytes used, no error found
      total csum bytes: 496182240
      total tree bytes: 1464221696
      total fs tree bytes: 813809664
      total extent tree bytes: 57655296
      btree space waste bytes: 248053148
      file data blocks allocated: 4385471590400
       referenced 512920408064
      btrfs check /dev/nvme0n1p2  4.15s user 1.66s system 62% cpu 9.316 total
      
  • EinfachUnersetzlich@lemm.ee
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    What RAID profile are you using on your filesystem? Checksum failures on RAID1/5/6/10 aren’t fatal because the block is read from a different mirror.

        • Agility0971@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Well I never set up any raid on my systems

          root@archiso /mnt/arch # btrfs device usage .
          /dev/nvme0n1p2, ID: 1
             Device size:           931.01GiB
             Device slack:              0.00B
             Data,single:           520.01GiB
             Metadata,DUP:            6.00GiB
             System,DUP:             16.00MiB
             Unallocated:           404.99GiB
          
          
    • Agility0971@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago
      root@archiso /mnt/arch # btrfs fi us .
      Overall:
          Device size:		 931.01GiB
          Device allocated:		 526.02GiB
          Device unallocated:		 404.99GiB
          Device missing:		     0.00B
          Device slack:		     0.00B
          Used:			 480.21GiB
          Free (estimated):		 447.51GiB	(min: 245.02GiB)
          Free (statfs, df):		 447.51GiB
          Data ratio:			      1.00
          Metadata ratio:		      2.00
          Global reserve:		 512.00MiB	(used: 0.00B)
          Multiple profiles:		        no
      
      Data,single: Size:520.01GiB, Used:477.49GiB (91.82%)
         /dev/nvme0n1p2	 520.01GiB
      
      Metadata,DUP: Size:3.00GiB, Used:1.36GiB (45.45%)
         /dev/nvme0n1p2	   6.00GiB
      
      System,DUP: Size:8.00MiB, Used:80.00KiB (0.98%)
         /dev/nvme0n1p2	  16.00MiB
      
      Unallocated:
         /dev/nvme0n1p2	 404.99GiB
      
      root@archiso /mnt/arch # btrfs device stats .
      [/dev/nvme0n1p2].write_io_errs    0
      [/dev/nvme0n1p2].read_io_errs     0
      [/dev/nvme0n1p2].flush_io_errs    0
      [/dev/nvme0n1p2].corruption_errs  19317
      [/dev/nvme0n1p2].generation_errs  0
      
      • 𝒍𝒆𝒎𝒂𝒏𝒏@lemmy.one
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        Few possibilities here:

        Could be something wrong with the SSD - is it a Samsung one by any chance? There was a firmware issue that caused the SSD lifespan to degrade at a higher rate than normal… This article only covers the 980 but I believe there were a few models affected

        https://www.tomshardware.com/news/samsung-980-pro-ssd-failures-firmware-update

        It also could be that whatever files were corrupted have been deleted (maybe browser cache files etc.) or the allocated block is corrupted but contains no files within it. After running a scrub, the names of files within a corrupted block are shown in dmesg - if there’s none then I think you’re fine, but strongly consider replacing the SSD/updating its firmware/checking its SMART diagnostic data to see if its ok.

        The error counter can be reset with btrfs dev sta --reset to see if these errors pop up again after trying a resolution

        • Agility0971@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          It’s a KINGSTON SA2000M81000G. Here is a “datasheet”.

          I’ve looked up some of the inode numbers in the logs and they point to some application state data in /var so reinstalling application could bring those files back.

          I’ve never touched SMART before since I’ve assumed it’s an HDD thing. Anyway. I’ve installed smartmontools. nvme ssds don’t report smart stats like for hdds so this answer suggested looking for Percentage used in stead.

          root@archiso ~ # smartctl -a --test=long /dev/nvme0n1 | grep "Used"
          Percentage Used:                    2%
          

          It could be true that the firmware is not optimal but I could not find any news about that like you have for the 980. gnome software should keep firmware up to date in the background but just for good measure I ran it in live environment as well. I will probably get a new ssd at some point in the future and maybe use this old one for non critical storage in the future.