They are bigger than I was able to capture on camera beauty of water heater being in the way.

  • dack@lemmy.world
    link
    fedilink
    arrow-up
    6
    arrow-down
    1
    ·
    1 year ago

    I’d probably go with some sort of split cover plate/flange (or a regular non-split one if you can disconnect it to feed it through). If you have access to a 3D printer, you can make one that way pretty easily. If not, you can probably find one at the hardware store or online that would work.

    • Hazdaz@lemmy.world
      link
      fedilink
      arrow-up
      8
      ·
      1 year ago

      Yeah definitely use a flanged cover plate but if this goes to an exterior wall, hit the hole with some expanding foam first. Let it dry and then cut the foam flush. Then use the flanged cover.

        • Starb3an@sh.itjust.works
          link
          fedilink
          arrow-up
          3
          ·
          1 year ago

          I consider “exterior” to mean one side of the wall is air conditioned/heated, and the other side is not. Therefore, an exterior wall has insulation in it. An interior wall is generally hollow.

        • Hazdaz@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I’d use some expanding foam if you could feel the air from the other side or see through it. You could also fill that area with silicone (which could also be used to help hold the flanged cover too.