Acebeam K65, XHP70.2 dedomed
Emisar D1K, XHP70.3 90cri 4000k
Emisar D4K x2, both 519a domed with boost driver, 4500k/5700k
Emisar D1v2 Osram W1
Love em all! The D1K has been getting the most use, such a great all-rounder. Beam is a nice middle-ground between throw/flood, and the 70.3 is a great balance of good color and high efficiency. Makes lots of pretty light and doesn’t get too hot doin it!
the 70.3 is a great balance of good color and high efficiency.
Great testimony on the XHP70.3! How do you think it compares to other throwy LEDs (if that’s the category it’s actually on) like the SFT40?
I would say the XHP70.3 is a very floody emitter due to its large light-emitting surface of 49mm2. I don’t have an SFT40 light (yet) but the tiny 1mm2 Osram in the D1v2 blows away the XHP70.3 D1K in terms of throw, even with less than half the lumens it has more than 5 times the candela. The SFT40 is 16mm2 so it would be somewhere between those two extremes, probably closer to the Osram. In a light like the K65 that has a big reflector and drives the XHP to its max power, you can still get a lot of throw from the 70.X emitters. The K65 does 2x the candela of the Osram D1v2 with a larger hotspot, it’s a light cannon! I wish Acebeam would bring the K65 back with the newer generation XHP70. The 70.2 has a yellow fried-egg beam with a green corona. The 70.3 has a beautifully clean beam with no tint-shift (orange-peel reflector helps that a bit)
