Corrosion is definitely a red flag, but that looks like just surface corrosion. Just from the picture, it doesn’t look deep, but it would need to be removed from the breaker and inspected to be sure.

If the issue is “downstream” of the meter, then it’s 100% the property owner’s problem. Unfortunately, the only options you have are to hire an electrician yourself or keep prodding your landlord until they take responsibility.

Yep, that’s why I haven’t messed with Kubernetes either; way overkill for a homelab and especially so since I downsized due to soaring electricity costs here.

The only reason I gave up on Docker Swarm was that it seemed pretty dead-end as far as being useful outside the homelab. At the time, it was still competing with Kubernetes, but Kube seems to have won out. I’m not even sure Docker CE even still has Swarm. It’s been a good while since I messed with it. It might be a “pro” feature nowadays.

Edit: Docker 28.5.2 still has Swarm.

Still, it was nice and a lot easier to use than Kubernetes once you wrapped your head around swarm networking.

I had 15 of the 2013-era 5010 thin clients. Most of them have had their SSDs and RAM upgraded.

They’ve worn many hats since I’ve had them, but some of their uses and proposed uses were:

1. I did a 15 node Docker Swarm setup and used that to both run some of my applications as well as learn how to do horizontal scaling.
2. After I tore down the Docker Swarm cluster, I set them up as diskless workstations to both learn how to do that and used them at a local event as web kiosks (basically just to have a bunch of stations people could use to fill out web based forms).
3. One of them was my router for a good while. Only replaced it in that role when I got symmetric gigabit fiber. Before that, I used VLANs to to run LAN and WAN over its single ethernet port since I had asymmetric 500 Mbps and never saturated the port.
4. Run small/lightweight applications in highly-available pairs/clusters
5. Use them to practice clustered services (Multi-master Galera/MariaDB, multi-master LDAP, CouchDB, etc)
6. Use them as Snapcast clients in each room
7. Add wireless cards, install OpenWRT, and make powerful access points for each room (can combine with the above and also be a Snapcast client)
8. Set them up as VPN tunnel endpoints, give them out to friends, and have a private network

Of the 15, I think I’m only actively using 4 nowadays. One is my MPD+Snapcast server, one is running HomeAssistant, ,the third is my backup LDAP server, and one runs my email server (really). The rest I just spin up as needed for various projects; I downsized my homelab and don’t have a lot of spare capacity for dev/test VMs these days, so these work great in place of that.

and “crisis actors”

Nice. Yeah, that’s what I’m looking to do. Grid is just there when I’m not generating enough onsite.

The good thing is there seem to be plenty of options these days.

Yeah, that’s a good place to start. Seeing that it costs almost $50/mo just to run my server/network gear was really eye opening. The stack averages about 290 watts (thank the gods I downsized when I did!) which comes out to:

(290/1000) * 24 * 30 * 0.23 = $48.02/mo

Still cheaper than cloud subscriptions, though.

Yeah, I was looking at Anker’s version of that, but it doesn’t have quite as much flexibility as some of dedicated hybrid solar inverters I was looking at. I haven’t read the specs for the EcoFlow version, but Anker’s is positioned more as a UPS/backup power for your house rather than primary power (unless you’re fully off-grid).

The hybrid inverter I was looking at can be configured in “UPS” mode (backup if your power is out) or only to use utility power if there’s not enough PV and the batteries are low as well as some other combinations.

I’m still in the planning phases since I don’t want to be installing on the roof or burying conduit in the winter lol.

Thanks. And yeah, being able to install solar eventually was one of many factors when I decided to buy a house on a whim rather than rent (not so much a whim as “ahead of schedule” due to unforeseen circumstances surrounding the house I was currently renting).

$0.56/kwh power

Jesus. My condolences. I hope anything you feed back is credited at retail rate.

This has been the push I’ve needed to pull the trigger on installing solar. My electric rates have gone from $0.09/KWh to $0.23/KWh in the last 5 years. Just got my bill after reducing as much as I could (my house is all electric sans the furnace). “Surely it’ll be under $100 this month,” I thought. Nope.

I’ve got 800W of PV currently in an ad-hoc setup* but I’m putting together the plan for a 3.2 KW system that can auto switch between battery, PV, and grid without backfeeding. Minus the batteries, the whole setup is going to cost me about $7,000. (Batteries aren’t required and will be added later)

Grid-tie is technically legal in my area, but the hoops you have to jump through are insane and there’s a high likelihood of being denied by the power company over the most bullshit of minutiae (seriously, they treat someone possibly feeding back 400 watts the same as if you were a MW-scale solar farm).

*The ad-hoc setup is just 4x200W panels in a 2S2P config. I charge an Anker PowerStation from that and use it to power random stuff. It’s currently powering my server stack while charging from the panels. :)

deleted by creator

do GSI roms still contain google binaries (play store, play services, etc…) or is it similar to a AOSP rom where its just a bare android image

Yes. That’s to say they can be either depending on how the ROM was built. All of the GSI ROM builders I’ve worked with usually have multiple releases of the same build with different configurations: root, no root, with Google services (often MicroG), without Google services, combinations of both, etc.

To my understanding, GSI ROMs are basically just the “userland” portion of a full ROM. Basically they use the stock/existing kernel, drivers, etc but replace the rest of the system that runs on top of it. If memory serves, they’re possible due to Project Treble. Sadly, they still require an unlocked bootloader to install, so they’re not a total fix-all.

They’re also very generic generic images (hence the “G” in the term). They’re not optimized for any specific device and can be hit-or-miss feature wise depending on the device. If you’re already reading about a specific device on XDA forums, then you’ll probably be able to see what works and what doesn’t.

TL;DR: Running a GSI ROM is like upgrading to a newer Linux distro but without upgrading the kernel.

“Does it piss you off when Google/whatever does [blank]? Yeah, me too. So I run my own versions to not have to deal with that crap. Would you like me to set you up an account on my stuff?”

A database can be used to plug into any number of applications that run on top of it as well as be easily shared by multiple people and centrally backed up. Auditing, logging, and row and table level access controls, and other measures can be easily added.

Excel files (or even MS Access files) as “databases” are often just people emailing around a file or accessing it from a shared drive. You end up with a split-brain situation at best and at worst you’re dealing with constant file corruption from multiple people thinking they can access it from a shared drive at the same time.

Then you get vendor lock in and are forced to keep MS Office professional licenses because Shawn created some stupid Access “app” 10 years ago which is “THE DATABASE” and no one understands how it works.

The baguette cushioned his fall and the striped shirt scared away any predators. The beret was just a beret, though. Even if you’ve fallen down a 130ft ravine that’s no excuse to look dowdy.

(None of this is true…probably)

Not that I’d own a smart fridge, but if I did and they started shoving ads on it, it’d look like this later that day:

I think the point of 11h is to achieve that kind of range without directional antennas. Basically as a higher-bandwidth version of LoRa.

Yeah, that one took me a minute. I think “drip” or “slow drip”? I know “drip” used to be a term but was never one I associated with “screwball” or “crackpot”. Usually I’d heard “drip” to mean something closer to “dull” or “boring”.

Pretty decent unless there’s a lot of animation / video in them. Calling, texting, looking up something on the internet, bank app, auth app, etc all work great. Some of the stock Android components don’t work super great with it, though, like the quick action buttons (though, arguably, they don’t work great on any Android phone either lol).

Feels sluggish at times but that’s just the e-ink being what it is. I mostly treat it like a dumb phone that’s also an e-reader.