Hello, first post here :D
A few month ago I modded a FW1AA with boost-buck driver for NiMH/li-ion and with RGB LEDs.
I used a TIR lens for the aux led to shine through, unfortunately it had artefacts in the spill that ended up a bit too distracting so I went back to the original reflector and used a thin flex PCB under the reflector with tiny LEDs that fit in the opening. I’m very satisfied with the result, plus the beam with the 519A+ SMO reflector is surprisingly good.
Edit : putting the video in the text since it didn’t create a YouTube thumbnail : https://youtu.be/u6aYa8FEt3s
What’s the diameter of the opening ?
Edit :
Oh you don’t have one, measuring from a picture I get 5.9mm, if that’s right then it will be very close.
I can try making a version with the LEDs closer to the 3535 cutout.
Yea I don’t own one yet, but it should be around 5.6mm to 5.7mm.
That would be great if you could, thanks.
Circle is 5.6mm :
![](https://lemmy.world/pictrs/image/858d0b47-3b04-4ec0-bb57-1e5ebf351997.png)
https://oshpark.com/shared_projects/6tVRn8Ux